后方油库整体生存概率分析计算

针对我军后方油库特点,探讨了油库整体生存概率计算的基本思路和方法,分析了各类分项目标生存概率的计算方法,采用层次分析对后方油库各分项目标权值进行了详细分析计算,可为后方油库伪装防护效能评估提供依据。     

Effectiveness of (R,Q) policies in one‐warehouse multiretailer systems with deterministic demand and backlogging

Consider a distribution system with a central warehouse and multiple retailers. Customer demand arrives at each of the retailers continuously at a constant rate. The retailers replenish their inventories from the warehouse which in turn orders from an outside supplier with unlimited stock. There are economies of scale in replenishing the inventories at both the warehouse and the retail level. Stockouts at the retailers are backlogged. The system incurs holding and backorder costs. The objective is to minimize the long‐run average total cost in the system. This paper studies the cost effectiveness of (R, Q) policies in the above system. Under an (R, Q) policy, each facility orders a fixed quantity Q from its supplier every time its inventory position reaches a reorder point R. It is shown that (R, Q) policies are at least 76% effective. Numerical examples are provided to further illustrate the cost effectiveness of (R, Q) policies. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 422–439, 2000     

Optimal policies for M/M/m queue with two different kinds of (N,T)‐policies

In this paper, two different kinds of (N, T)‐policies for an M/M/m queueing system are studied. The system operates only intermittently and is shut down when no customers are present any more. A fixed setup cost of K > 0 is incurred each time the system is reopened. Also, a holding cost of h > 0 per unit time is incurred for each customer present. The two (N, T)‐policies studied for this queueing system with cost structures are as follows: (1) The system is reactivated as soon as N customers are present or the waiting time of the leading customer reaches a predefined time T, and (2) the system is reactivated as soon as N customers are present or the time units after the end of the last busy period reaches a predefined time T. The equations satisfied by the optimal policy (N*, T*) for minimizing the long‐run average cost per unit time in both cases are obtained. Particularly, we obtain the explicit optimal joint policy (N*, T*) and optimal objective value for the case of a single server, the explicit optimal policy N* and optimal objective value for the case of multiple servers when only predefined customers number N is measured, and the explicit optimal policy T* and optimal objective value for the case of multiple servers when only predefined time units T is measured, respectively. These results partly extend (1) the classic N or T policy to a more practical (N, T)‐policy and (2) the conclusions obtained for single server system to a system consisting of m (m ≥ 1) servers. © 2000 John Wiley & Sons, Inc. Naval Research Logistics 47: 240–258, 2000     

星地距离变化对星地双向时间比对的影响及改正

星地时间同步是卫星导航系统的关键技术,星地双向时间比对能有效提高星地时间同步的精度。在分析了星地距离变化对星地双向时间比对可引起百纳秒量级误差后,提出了前后历元观测数据差分改正方法,通过数学仿真验证该方法能达到纳秒量级精度。     

给定降质约束下一类DCT域图像水印算法的拉伸系数估计

数字水印是数字作品版权保护的重要技术手段。与噪声污染类似,数字水印的嵌入必然会损失原作品的质量。数字图像的质量直接关系其商业价值,在给定降质约束下自适应地调节嵌入深度是符合产业化标准的数字水印关键技术之一。根据DCT交流系数的拉普拉斯分布模型,推导了DCT域典型水印算法中拉伸系数与信噪比和峰值信噪比之间的理论关系。依据该理论关系,得到了在给定降质约束下一类典型图像水印算法的拉伸系数估计方法,实验结果表明该估计方法具有较高的精度。     

惯性测量匹配法测定船体变形实施方案研究

介绍了船体变形的产生原因,详细分析了船体变形对航姿参数的影响和惯性测量匹配在实船上测量船体变形时的几种实施方案。分别讨论了在中心航姿系统部位和局部基准部位是否安装加速度计和速率陀螺时的不同情况,具体推导了变形角、局部基准部位的航姿角和摇摆线速度的计算公式。对各种方案进行了分析比较,指出了各自的优缺点,为惯性测量匹配法在实船上的应用打下了基础。     

利用分数抽头均衡器快速定时同步

建立了分数抽头均衡器(FSE)与定时同步相结合的信号模型,分析了定时误差对于均衡性能的影响,提出了一种新的基于FSE的快速定时同步算法。在未知参考序列相位的情况下,利用循环均衡快速收敛并建立同步。在相位跟踪阶段,利用抽头增益跟踪定时相位误差,通过对采样数据进行抽取或插值以及均衡器抽头的移位操作控制相位误差。仿真表明,该算法能在长度为均衡器抽头数的符号周期内快速建立同步,通过采样率的选择可以精确地控制定时相位误差。     

紧凑型Tesla变压器的参数测量

对设计加工研制的Tesla变压器,根据Smith建议的测量方法,解决了对紧凑Teala变压器耦合系数进行比较准确地测量的问题,实测耦合系数高达0.9,并对耦合系数稍低于理论设计值的原因进行了探讨,同时分析给出了物理原因.此外,根据Teala变压器电路在初次级初、次级短路和低电压充电情形下的实测电压波形,估算出Tesla变压器电路各参数数值.这些数值与理论计算值吻合,并能满足实际高压充电的要求.     

固定翼反潜巡逻机作战效能评估

运用改进的Topsis评估模型对反潜巡逻机的作战效能进行评估,主要是对指标权重的计算方法进行改进:综合考虑客观熵权和专家主观权重得到综合权重,通过客观的熵权信息来调整主观权重的偏差,使得反潜巡逻机作战效能的评价结果更为合理。实例分析表明,该方法能够主客观相结合,简单有效,具有一定的推广应用价值。